糖心TV

The project publications are listed below in 3 sub-sections:

1. Chapter in a book.
2. Articles in journals.
3. Publications in conference proceedings/workshops.

They are then sub-divided by year but are not sorted any further and appear within the sub-heading in the order in which they were entered.

• Sun, J. Y., Zhang, Z. J., Tong, J., & Jia, H. L. (2016). Application of bionic technologies for soil-engaging tillage components in northeast China. In Bio-Inspired Surfaces and Applications (pp. 555-578).
• Kim, H.; Smyrek, P.; Zheng, Y.; Pfleging, W.; Piqu茅, A. (2018). Laser-Materials Processing for Energy Storage Applications. Pulsed Laser Ablation - Advances and Applications in Nanoparticles and Nanostructuring Thin Films (pp.499-544).

2018

• Lu, P., Wood, RJK., Gee, MG., Wang, L., Pfleging, W. A novel surface texture shape for directional friction control. Tribology Letters, 66/1, Feb 2018. doi:
• Pfleging, W. A review of laser electrode processing for development and manufacturing of lithium-ion batteries. Nanophotonics 7/3.
• Cai, K., Tian, Y., Liu, X., Fatikow, S., Wang, F., Cui, L., Zhang, D., Shirinzadeh, B. Modeling and controller design of a 6-DOF precision positioning system. Mechanical Systems and Signal Processing 104 pp536-555.
• Sun, J., Liu, C., Bhushan, B., Wu, W., Tong, J. Effect of microtrichia on the interlocking mechanism in the Asian ladybeetle, Harmonia axyridis (Coleoptera: Coccinellidae). Beilstein Journal of Nanotechnology, 9, pp812-823, March 2018.
• Chik, N., Wan Md Zain, WS., Mohamad, AJ., Sidek, MZ., Wan Ibrahim, WH., Reif, A., Rakebrandt, J-H., Pfleging, W., Liu, X. Bacterial Adhesion on the Titanium and Stainless-Steel Surfaces Undergone Two Different Treatment Methods: Polishing and Ultrafast Laser Treatment. IOP Conference Series: Materials Science and Engineering, 358, pp. 012034

2017

• Liang, C., Wang, F., Tian, Y., Zhao, X., Zhang, D. Development of a high speed and precision wire clamp with both position and force regulations. Robotics and Computer-Integrated Manufacturing, 44, pp 208-217.
• Liu, T., Gao, W., Zhang, D., Zhang, Y., Chang, W., Liang, C., Tian, Y. Analytical modeling for thermal errors of motorized spindle unit. International Journal of Machine Tools and Manufacture, 112, pp 53-70.
• Liu, T., Gao, W., Tian, Y., Zhang, D., Zhang, Y., Chang, W. Power matching based dissipation strategy onto spindle heat generations. Applied Thermal Engineering, 113, pp 499-507.
• Guo, Z., Tian, Y., Tian, J., Liu, X., Wang, F., Zhang, H., Zhang, D. Probe system design for three dimensional micro/nano scratching machine. Microstystem Technologies, 23/6 pp 2285-2295.
• Xu, Y., Gao, W., Yu, Y., Zhang, D., Zhao, X., Tian, Y., Cun, H. Dynamic optimization of constrained layer damping structure for the headstock of machine tools with modal strain energy method. Shock and Vibration, 2017, pp 1-13.
• Clark, L., Shirinzadeh, B., Tian, Y., Fatikow, S., Zhang, D. Pose estimation and calibration using nonlinear capacitance sensor models for micro/nano positioning. Sensors and Actuators A: Physical, 253, pp 118-130.
• Cai, K., Tian, Y., Wang, F., Zhang,D., Liu, X., Shirinzadeh, B. Modeling and tracking control of a novel XY胃z stage. Microsystem Technologies, 23/8, pp3575-3588.
• Guo,Z., Tian, Y., Liu, X., Wang, F., Zhou, C., Zhang, D. Modeling and simulation of the probe tip based nanochannel scratching. Precision Engineering, 49, pp 136-145.
• Zhu, J., Tian, Y., Yang, C., Cui, L., Wang, F., Zhang, D., Liu, X. Low-cost and fast fabrication of the ultrasonic embossing on polyethylene terephthalate (PET) films using laser processed molds. Microsytem Technologies, 23/12, pp 5653-5668.
• Yang, Z., Tian, YL., Yang, CJ., Wang, FJ., Liu, XP. Modification of wetting property of Inconel 718 surface by nanosecond laser texturing. Applied Surface Science, 414, pp 313-324.
• Guo, Z., Tian, Y., Liu, X., Wang, F., Zhou,C., Zhang, D. Experimental investigation of the tip based micro/nano machining. Applied Surface Science 426 pp 406-417.
• Zhu, X., Liu, L., Wang, Z., Liu, X. Axisymmetric contact problem for a flattened cell: contributions of substrate effect and cell thickness to the determination of viscoelastic properties by using AFM indentation. Scanning, 2017, 1-11.
• Cai,K., He, X., Tian, Y., Liu, X., Zhang, D., Shirinzadeh, B. Design of a XYZ scanner for home-made high-speed atomic force microscopy. Microsystem Technologies,
• Pfeifenberger, MJ., Mangang, M., Wurster, S., Reiser, J., Hohenwarter, A., Pfleging, W., Kiener, d., Pippan, R. The use of femtosecond laser ablation as a novel tool for rapid micro-mechanical sample preparation. Materials and Design Vol 121 (109-118). .
• Lu, P., Wood, RJK., Gee, MG., Wang, L., Pfleging, W. The use of anisotropic texturing for control of directional friction. tribology International 02/2017.
• Zhang, N., Zheng, Y., Trifonova, A., Pfleging, W. Laser structured Cu foil for high-performance lithium-ion battery anodes. Journal of Applied Electrochemistry 05/2017, 47(7) 1-9. .
• Agarwal, N., Ryu, H., Mangang, M., Pfleging, W., Kim, J. Direct writing of a conducting polymer pattern in aqueous solution by using an ultrashort laser pulse. RSC Advances, 08/2017, 7 (61), 38565-38569.
• Tian, Y., Liu, Y., Wang, F., Jing, X., Zhang, D., Liu, X. Modelling and analysis of helical milling process. International Journal of Advanced Manufacturing Technology, 2017, 90(1-4): 1003-1022.
• Zhu, X., Wang, Z., Liu, X. Investigation of effect of fullerenol on viscoelasticity properties of human hepatocellular carcinoma by AFM-based creep tests. Journal of Materials Research, June 2017, 32 (13) pp2521-2531.
• Sun J Y, Liu C, Du H Y, Tong J. Design of a bionic aviation material based on the microstructure of beetle鈥檚 elytra. International Journal of Heat and Mass Transfer, 2017, 114:62-72.
• Sun J Y, Du R J, Liu X F, Bechkoum K, Tong J, Chen D H. A simulation of the flight characteristics of the deployable hindwings of beetle. Journal of Bionic Engineering, 2017, 14(2):296-306 (cover paper). .
• Sun J Y, Wu W, Liu C, Tong J. Investigating the nanomechanical properties and reversible color change properties of the beetle Dynastes tityus. Journal of Materials Science, 2017, 52(11): 6150-6160 (cover paper).
• Cai, K., Tian, Y., Wang, F., Zhang, D., Liu, X., & Shirinzadeh, B. (2017). Design and control of a 6-degree-of-freedom precision positioning system. Robotics and Computer-Integrated Manufacturing, 44, 77-96. .
• Zhang, Z., Wu, W., Tong, J., & Sun, J. (2017). Relationship of hydration and nanomechanical characteristics of beetle cuticle. Bioinspired, Biomimetic and Nanobiomaterials, 1-7. .
• Gotcu, P., Pfleging, W., Smyrek, P., Seifert, HJ. Thermal behaviour of LixMeO2(Me = Co or Ni + Mn + Co) cathode materials. Physical Chemistry Chemical Physics, 19/19, pp1920-11930. April 2017. doi 10.1039/C7CP00513J

2016

• Mottay, E., Liu, X., Zhang, H., Mazur, E., Sanatinia, R., Pfleging, W. Industrial applications of ultrafast laser processing. MRS Bulletin 41/12 pp 984-992.
• Smyrek, P., Pr枚ll, J., Seifert, H. J., & Pfleging, W. (2016). Laser-induced breakdown spectroscopy of laser-structured Li (NiMnCo) O2 electrodes for lithium-ion batteries. Journal of the Electrochemical Society, 163(2), A19-A26.
• Lu, P., Wood, R. J., Gee, M. G., Wang, L., & Pfleging, W. (2016). The friction reducing effect of square-shaped surface textures under lubricated line-contacts—an experimental study. Lubricants, 4(3), 26. .
• Zhu, X., Zhang, N., Wang, Z., & Liu, X. (2016). Investigation of work of adhesion of biological cell (human hepatocellular carcinoma) by AFM. Journal of Micro-Bio Robotics, 11(1-4), 47-55.
• Sun, J., Wu, W., Xue, W., Tong, J., & Liu, X. (2016). Anisotropic nanomechanical properties of bovine horn using modulus mapping. IET nanobiotechnology, 10(5), 334-339.
• Zhu, X., Siamantouras, E., Liu, K. K., & Liu, X. (2016). Determination of work of adhesion of biological cell under AFM bead indentation. Journal of the mechanical behavior of biomedical materials, 56, 77-86.
• Liu, J., Yang, Y., Hassanin, H., Jumbu, N., Deng, S., Zuo, Q., & Jiang, K. (2016). Graphene–alumina nanocomposites with improved mechanical properties for biomedical applications. ACS applied materials & interfaces, 8(4), 2607-2616.
• Sun, J., Wu, W., Ling, M., Bhushan, B., & Tong, J. (2016). A dynamic nanoindentation technique to investigate the nanomechanical properties of a colored beetle. Rsc Advances, 6(82), 79106-79113. .
• Sun, J., Wu, W., Ling, M., Bhushan, B., & Tong, J. (2016). The hydraulic mechanism in the hind wing veins of Cybister japonicus Sharp (order: Coleoptera). Beilstein Journal of Nanotechnology, 7(1), 904-913.
• Sun, J., Wu, W., Ling, M., Tong, J., & Ren, L. (2016). Fluid analysis of vein of beetle hindwing during unfolding action. International Journal of Heat and Mass Transfer, 101, 379-386.
• Yang, C. J., Mei, X. S., Tian, Y. L., Zhang, D. W., Li, Y., & Liu, X. P. (2016). Modification of wettability property of titanium by laser texturing. The International Journal of Advanced Manufacturing Technology, 87(5-8), 1663-1670.
• Wang, F., Liang, C., Tian, Y., Zhao, X., & Zhang, D. (2016). A flexure-based kinematically decoupled micropositioning stage with a centimeter range dedicated to micro/nano manufacturing. IEEE/ASME Transactions on Mechatronics, 21(2), 1055-1062.
• Wang, F., Zhang, H., Liang, C., Tian, Y., Zhao, X., & Zhang, D. (2016). Design of high-frequency ultrasonic transducers with flexure decoupling flanges for thermosonic bonding. IEEE Transactions on Industrial Electronics, 63(4), 2304-2312.
• Clark, L., Shirinzadeh, B., Tian, Y., & Yao, B. (2016). Development of a passive compliant mechanism for measurement of micro/nanoscale planar 3-DOF motions. IEEE/ASME Transactions on Mechatronics, 21(3), 1222-1232.
• Cai, K., Tian, Y., Wang, F., Zhang, D., & Shirinzadeh, B. (2016). Development of a piezo-driven 3-DOF stage with T-shape flexible hinge mechanism. Robotics and Computer-Integrated Manufacturing, 37, 125-138.
• Heinonen, S., Nikkanen, J. P., Hakola, H., Huttunen-Saarivirta, E., Kannisto, M., Hyv盲rinen, L., J盲rvel盲inen, M. & Lev盲nen, E. (2016, April). Effect of temperature and concentration of precursors on morphology and photocatalytic activity of zinc oxide thin films prepared by hydrothermal route. In IOP Conference Series: Materials Science and Engineering (Vol. 123, No. 1, p. 012030). IOP Publishing.
• Guo, Z., Tian, Y., Tian, J., Liu, X., Wang, F., Zhang, H., & Zhang, D. (2016). Probe system design for three dimensional micro/nano scratching machine. Microsystem Technologies, 1-11.
• Wei, X., Li, W., Liang, B., Li, B., Zhang, J., Zhang, L., & Wang, Z. (2016). Surface modification of Co-Cr-Mo implant alloy by laser interference lithography. Tribology International, 97, 212-217.
• Meng, Q., Wang, Z., Chai, X., Weng, Z., Ding, R., & Dong, L. (2016). Fabrication of hematite (伪-Fe 2 O 3) nanoparticles using electrochemical deposition. Applied Surface Science, 368, 303-308.
• Hu, Y., Wang, Z., Weng, Z., Yu, M., & Wang, D. (2016). Bio-inspired hierarchical patterning of silicon by laser interference lithography. Applied optics, 55(12), 3226-3232.
• Hou, Y., Wang, Z., Hu, Y., Li, D., & Qiu, R. (2016). Capture and sorting of multiple cells by polarization-controlled three-beam interference. Journal of Optics, 18(3), 035401.
• Zhang, Z., Jia, H., Sun, J., & Tong, J. (2016). Nanoindentation investigation of the stress exponent for the creep of dung beetle (Copris ochus Motschulsky) cuticle. Bioengineered, 7(5), 357-364.

2015

• Tong, J., Chang, Z., Yang, X., Zhang, J., Liu, X., Chetwynd, D. G., Chen, D. & Sun, J. (2015). Nanoindentation mechanical properties and structural biomimetic models of three species of insects wings. Journal of Wuhan University of Technology-Mater. Sci. Ed., 30(4), 831-839.
  
• Guo, Z., Tian, Y., Liu, C., Wang, F., Liu, X., Shirinzadeh, B., & Zhang, D. (2015). Design and control methodology of a 3-DOF flexure-based mechanism for micro/nano-positioning. Robotics and Computer-Integrated Manufacturing, 32, 93-105.
• Guo, Z., Tian, Y., Liu, X., Shirinzadeh, B., Wang, F., & Zhang, D. (2015). An inverse Prandtl–Ishlinskii model based decoupling control methodology for a 3-DOF flexure-based mechanism. Sensors and Actuators A: Physical, 230, 52-62.
• Tian, Y., Liu, C., Liu, X., Wang, F., Li, X., Qin, Y., Zhang, D. & Shirinzadeh, B. (2015). Design, modelling and characterization of a 2-DOF precision positioning platform. Transactions of the Institute of Measurement and Control, 37(3), 396-405.
• Zhang, X., Gao, Y., Ostadi, H., Jiang, K., & Chen, R. (2015). Method to improve catalyst layer model for modelling proton exchange membrane fuel cell. Journal of Power Sources, 289, 114-128.
• Jiang, K., Li, J., & Liu, J. (2015). Spark plasma sintering and characterization of graphene platelet/ceramic composites. Advanced Engineering Materials, 17(5), 716-722.
• El-sayed, T., Imbaby, M., & Jiang, K. (2015). A finite-element hardness model for analyzing 316L stainless steel/ceramic nanocomposites. Mechanics of Composite Materials, 51(1), 33-42.
• Sun, J., Wu, W., Xue, W., Akhtar, R., Ren, L., & Tong, J. (2015). Quantitative nanomechanical properties of the cuticle of the multicolored Asian lady beetle using the modulus mapping technique. Current Nanoscience, 11(2), 245-252.
• Wang, F. J., Zhang, H. J., Liang, C. M., Tian, Y. L., Zhao, X. Y., & Zhang, D. W. (2015). Note: Decoupling design for high frequency piezoelectric ultrasonic transducers with their clamping connections. Review of Scientific Instruments, 86(12), 126111.
• Shang, J., Tian, Y., Li, Z., Wang, F., & Cai, K. (2015). A novel voice coil motor-driven compliant micropositioning stage based on flexure mechanism. Review of Scientific Instruments, 86(9), 095001.
• Yang, C., Tian, Y., Cui, L., & Zhang, D. (2015). Laser-induced changes in titanium by femtosecond, picosecond and millisecond laser ablation. Radiation Effects and Defects in Solids, 170(6), 528-540.
• Yang, N., Tian, Y., & Zhang, D. (2015). Novel real function based method to construct heterogeneous porous scaffolds and additive manufacturing for use in medical engineering. Medical engineering & physics, 37(11), 1037-1046.
• Wang, F., Liang, C., Tian, Y., Zhao, X., & Zhang, D. (2015). Design of a piezoelectric-actuated microgripper with a three-stage flexure-based amplification. IEEE/ASME Transactions on Mechatronics, 20(5), 2205-2213.
• Li, Y., Tian, Y., Yang, C., Cai, K., & Zhang, D. (2015). Torsional properties of Boron Nitride nanocones with different cone heights, disclination angles and simulation temperatures. Nano, 10(07), 1550097.
• Liang, C., Wang, F., Tian, Y., Zhao, X., Zhang, H., Cui, L., Zhang, D. & Ferreira, P. (2015). A novel monolithic piezoelectric actuated flexure-mechanism based wire clamp for microelectronic device packaging. Review of Scientific Instruments, 86(4), 045106.
• Sun, X., Chen, W., Fatikow, S., Tian, Y., Zhou, R., Zhang, J., & Mikczinski, M. (2015). A novel piezo-driven microgripper with a large jaw displacement. Microsystem Technologies, 21(4), 931-942.
• Cui, L., Gerhardy, C., Schomburg, W. K., Tian, Y., & Zhang, D. (2015). Fabrication of polymer electronic boards by ultrasonic embossing and welding. Microsystem Technologies, 21(2), 365-369.
• Wang, F., Ma, Z., Gao, W., Zhao, X., Tian, Y., Zhang, D., & Liang, C. (2015). Dynamic modeling and control of a novel XY positioning stage for semiconductor packaging. Transactions of the Institute of Measurement and Control, 37(2), 177-189.
• Liu, T., Gao, W., Tian, Y., Zhang, H., Chang, W., Mao, K., & Zhang, D. (2015). A differentiated multi-loops bath recirculation system for precision machine tools. Applied Thermal Engineering, 76, 54-63.
• Liu, T., Gao, W., Tian, Y., Mao, K., Pan, G., & Zhang, D. (2015). Thermal simulation modeling of a hydrostatic machine feed platform. The International Journal of Advanced Manufacturing Technology, 79(9-12), 1581-1595.
• Clark, L., Shirinzadeh, B., Tian, Y., & Oetomo, D. (2015). Laser-based sensing, measurement, and misalignment control of coupled linear and angular motion for ultrahigh precision movement. IEEE/ASME Transactions on Mechatronics, 20(1), 84-92.
• Tian, Y., Li, Z., & Cai, K. (2015). Wrinkling behaviour of annular graphynes under circular shearing load using molecular dynamics simulations. Nanomaterials and Nanotechnology, 5, 1-9.
• Zhang, Z., Jia, H., & Sun, J. (2015). Bioinspired design of a ridging shovel with anti-adhesive and drag reducing. Advances in Mechanical Engineering, 7(3), 1687814014568547.
• Zhao, L., Wang, Z., Zhang, J., Yu, M., Li, S., Li, D., & Yue, Y. (2015). Effects of laser fluence on silicon modification by four-beam laser interference. Journal of Applied Physics, 118(23), 233106.
• Li, L., Wang, Z., Li, W., Peng, K., Zhang, Z., Yu, M., Song, Z., Weng, Z., Wang, D. & Zhao, L. (2015). Fabrication of Pt nanowires with a diffraction-unlimited feature size by high-threshold lithography. Applied Physics Letters, 107(13), 133104.
• Zhao, L., Wang, Z., Zhang, J., Cao, L., Li, L., Yue, Y., & Li, D. (2015). Antireflection silicon structures with hydrophobic property fabricated by three-beam laser interference. Applied Surface Science, 346, 574-579.

2018

• Smyrek, P., Zheng, Y., Seifert, HJ., Pfleging, W., Klotzbach, U., Washio, K., Kling, R. Laser in battery manufacturing: impact of intrinsic and artificial electrode porosity on chemical degradation and battery lifetime. SPIE LASE 10520, Laser-based Micro- and Nanoprocessing XII, 10520. doi: 10.5445/IR/1000080523
• Zheng, Y., Seifert, HJ., Smyrek, P, Pfleging, W. Development of Laser Structured Silicon-based Anodes for Lithium-ion Batteries. 2018 IEEE International Conference on Manipulation, Manufacturing and Measurement on the Nanoscale (3M-NANO) (pp 6-9).
• Jing, X., Yang, C., Zheng, S., Chen, X., ; Zhao, Y. Investigation of Wettability of Zirconia by Nanosecond Laser Treatment. 2018 IEEE International Conference on Manipulation, Manufacturing and Measurement on the Nanoscale (3M-NANO) (pp 10-13).
• Tian, Y., Zhao, Y., Yang, Z., Yang, C. Effects of Carbon Ion Implantation on Surface Performance of Modified NiTi Shape Memory Alloy. 2018 IEEE International Conference on Manipulation, Manufacturing and Measurement on the Nanoscale (3M-NANO) (pp 14-17).
• Huang, S., Jing, X., Shang, P., Wang, F. Design of A Novel Piezoelectric Actuated Two-Degree-of-freedom Compliant Stage. 2018 IEEE International Conference on Manipulation, Manufacturing and Measurement on the Nanoscale (3M-NANO) (pp 18-22).

2017

• Sun JY, Liu C, Wu W, Du R J, Zhang Z J. Microstructural characteristics and nanomechanical properties of hindwings of the asian ladybeetle, Harmonia Axyridis. Manipulation, Manufacturing and Measurement on the Nanoscale (3M-NANO), 2017 IEEE International Conference (pp. 228-230).
• Sun, JY., Wu, W., Du, R., Pan, C., Zhang, Z. Nanomechanical properties of elytra derived from irreversible and reversible color-changing beetles. Manipulation, Manufacturing and Measurement on the Nanoscale (3M-NANO), 2017 IEEE International Conference (pp. 195-198).
• Zheng, Y., Smyrek, P., Rakebrandt, J.-H., K眉bel, Ch; Seifert, H. J., Pfleging, W. Fabrication and characterization of silicon-based 3D electrodes for high-energy lithium-ion batteries. SPIE LASE 10092, Laser-based Micro- and Nanoprocessing XI, 100920L
  
• Smyrek, P., Zheng, Y., Rakebrandt, J-H., Seifert, HJ., Pfleging, W. Investigation of micro-structured Li(Ni1/3Mn1/3Co1/3)O2 cathodes by laser-induced breakdown spectroscopy. SPIE LASE 10092, Laser-based Micro- and Nanoprocessing XI, 100920S
• Rakebrandt, J-H., Smyrek, P., Zheng, Y., Seifert, HJ., Pfleging, W. Laser processing of thick Li(NiMnCo)O2 electrodes for lithium-ion batteries. SPIE LASE 10092, Laser-based Micro- and Nanoprocessing XI, 100920M,
• Rakebrandt, J-H., Smyrek, P., Zheng, Y., Seifert, HJ., Pfleging, W. Laser micro structuring of composite Li(Ni<inf>0.6</inf>Mn<inf>0.2</inf>Co<inf>0.2</inf>)O<inf>2</inf> cathode layersfor lithium-ion batteries. 2017 IEEE International Conference on Manipulation, Manufacturing and Measurement on the Nanoscale (3M-NANO) (pp. 57-60).
• Smyrek, P., Zheng, Y., Rakebrandt, J-H., Seifert, HJ., Pfleging, W. Laser-induced breakdown spectroscopy for studying the electrochemical impact of porosity variations in composite electrode materials. 2017 IEEE International Conference on Manipulation, Manufacturing and Measurement on the Nanoscale (3M-NANO) (pp65-68).
• Yang, Z., Tian, Y., Liu, X. The investigation of equilibrium contact state of liquid droplet on determined rough surfaces. 2017 IEEE International Conference on Manipulation, Manufacturing and Measurement on the Nanoscale (3M-NANO) (pp. 50-56).
• Zheng, Y., Smyrek, P., Rakebrandt, J-H., Seifert, HJ., Pfleging, W., Kubel, C. Silicon-based 3D electrodes for high power lithium-ion battery. 2017 IEEE International Conference on Manipulation, Manufacturing and Measurement on the Nanoscale (3M-NANO) (pp. 61-64).
• Zhu, J., Tian, Y., Yang, C., Wang, F., Liu, X. Lithography-induced wettability changes of silicon. 2017 IEEE International Conference on Manipulation, Manufacturing and Measurement on the Nanoscale (3M-NANO) (pp. 69-73).
• Li, M., Zhang, X., Tian, Y., Ren, J., Jiang, K., Liu, J., Munagala, SP. Surface properties of graphene platelets/nickel composite coatings. 2017 IEEE International Conference on Manipulation, Manufacturing and Measurement on the Nanoscale (3M-NANO) (pp. 74-78).

2016

• Zheng, Y., An, Z., Smyrek, P., Seifert, H. J., Kunze, T., Lang, V., Lasagni, A.F. & Pfleging, W. (2016, March). Direct laser interference patterning and ultrafast laser-induced micro/nano structuring of current collectors for lithium-ion batteries. SPIE LASE (pp. 97361B-97361B). International Society for Optics and Photonics.
  
• Smyrek, P., Zheng, Y., Seifert, H. J., & Pfleging, W. (2016, March). Post-mortem characterization of fs laser-generated micro-pillars in Li (Ni1/3Mn1/3Co1/3) O2 electrodes by laser-induced breakdown spectroscopy. SPIE LASE (pp. 97361C-97361C). International Society for Optics and Photonics.
• Smyrek, P., Kim, H., Zheng, Y., Seifert, H. J., Piqu茅, A., & Pfleging, W. (2016, April). Laser printing and femtosecond laser structuring of electrode materials for the manufacturing of 3D lithium-ion micro-batteries. SPIE LASE (pp. 973806-973806). International Society for Optics and Photonics.
• Pfleging, W., Zheng, Y., Mangang, M., Bruns, M., & Smyrek, P. (2016, March). Laser processes and analytics for high power 3D battery materials. SPIE LASE (pp. 974013-974013). International Society for Optics and Photonics.
• Zheng, Y., An, Z., Smyrek, P., Seifert, H. J., Pfleging, W., Kunze, T., Lang, V. & Lasagni, A. F. (2016, July). Laser interference patterning and laser-induced periodic surface structure formation on metallic substrates. Manipulation, Manufacturing and Measurement on the Nanoscale (3M-NANO), 2016 IEEE International Conference on (pp. 159-163). IEEE.
• Smyrek, P., Zheng, Y., Seifert, H. J., & Pfleging, W. (2016, July). Laser-induced breakdown spectroscopy as a powerful tool for characterization of laser modified composite materials. Manipulation, Manufacturing and Measurement on the Nanoscale (3M-NANO), 2016 IEEE International Conference on (pp. 164-167). IEEE.
• Fan, Y., Yu, M., Li, S., Wang, Z., & Song, Z. (2016, July). Fabrication of micropolarizers by electron beam lithography. Manipulation, Manufacturing and Measurement on the Nanoscale (3M-NANO), 2016 IEEE International Conference on (pp. 15-18). IEEE.
• Liu, L., Wang, Z., Weng, Z., Li, L., Cai, J., Dong, L., Song, Z. & Xu, H. (2016, July). Nanomanipulation of single nanowires on structured surfaces fabricated by laser interference lithography. Manipulation, Manufacturing and Measurement on the Nanoscale (3M-NANO), 2016 IEEE International Conference on (pp. 145-148). IEEE.
• Liu, Q., Li, W., Cao, L., Wang, J., Qu, Y., Wang, X., Yan, J., Wang, Z., Liang, B., Di, X. & Qiu, R. (2016, July). Ti-6Al-4V alloy modification by laser interference lithography. Manipulation, Manufacturing and Measurement on the Nanoscale (3M-NANO), 2016 IEEE International Conference on (pp. 366-370). IEEE.
• Liu, Y., Wang, Z., Zhao, Y., Wang, X., & Yang, Y. (2016, July). Quantitative imaging and analysis of SMCC-7721 cells Using AFAM. Manipulation, Manufacturing and Measurement on the Nanoscale (3M-NANO), 2016 IEEE International Conference on (pp. 314-317). IEEE.
• Zhao, L., Wang, Z., Zhang, W., Wang, Y., Wang, X., & Guo, F. (2016, July). DNA network structures induced by ferric ions on mica surfaces. Manipulation, Manufacturing and Measurement on the Nanoscale (3M-NANO), 2016 IEEE International Conference on (pp. 310-313). IEEE.
• Zhao, Y., Wang, Z., Hou, F., Liu, Y., Wang, X., Qu, Y., & Zhang, W. (2016, July). Effect of curing time on cell structures. Manipulation, Manufacturing and Measurement on the Nanoscale (3M-NANO), 2016 IEEE International Conference on (pp. 79-82). IEEE.
• Hou, F., Wang, Z., Zhao, Y., Qu, Y., & Wang, X. (2016, July). A method for the mechanical stimulation of living single-cells using a voltage-excited AFM probe. Manipulation, Manufacturing and Measurement on the Nanoscale (3M-NANO), 2016 IEEE International Conference on (pp. 74-78). IEEE.

2015

• Zheng, Y., Pr枚ll, J., Seifert, H. J., & Pfleging, W. (2015, October). Formation of nanostructures by femtosecond laser processing. Manipulation, Manufacturing and Measurement on the Nanoscale (3M-NANO), 2015 International Conference on (pp. 329-333). IEEE.
• Dong, L., Liu, Q., Liu, Y., Li, W., Wang, Z., & Li, D. (2015, October). Effect of surface area on the wettability of dual micro-and nanostructures fabricated by laser interference lithography. Manipulation, Manufacturing and Measurement on the Nanoscale (3M-NANO), 2015 International Conference on (pp. 163-164). IEEE.
• Cai, J., Yu, M., Fan, Y., Wang, Z., & Hao, Y. (2015, October). Fabrication of micropolarizer array for visible polarization imaging. Manipulation, Manufacturing and Measurement on the Nanoscale (3M-NANO), 2015 International Conference on (pp. 103-106). IEEE.
• Qu, X., Dong, L., Cai, J., & Wang, Z. (2015, October). Manipulation of living cells by optically induced dielectrophoresis. Manipulation, Manufacturing and Measurement on the Nanoscale (3M-NANO), 2015 International Conference on (pp. 259-262). IEEE.
• Meng, Q., Liu, J., Zhang, C., & Wang, Z. (2015, October). Chemical synthesis and characterization of magnetic nanoparticles. Manipulation, Manufacturing and Measurement on the Nanoscale (3M-NANO), 2015 International Conference on (pp. 12-15). IEEE.
• Deng, S., Jiang, K., Butt, H. (2015, October). Ultra-thin flat lenses made of graphene. Manipulation, Manufacturing and Measurement on the Nanoscale (3M-NANO), 2015 International Conference on. IEEE.