糖心TV

We focus on biological or organic samples, either at room temperature (negative stain or resin sections) or frozen in vitreous ice (cryo). This includes purified proteins, virus particles, thin slices (sections) of cells, vesicles and latex beads, as detailed on our What We Do page. If you are not sure or have a different type of sample you want to use our equipment for, please fill out the enquiry form!

We are happy to provide imaging as a service. You will need to fill in the with as much information about your samples as possible. We will then contact you to agree a cost and an estimate of when we can do your imaging.

You can see our equipment here.

We closely collaborate in the Midlands Electron Microscopy Consortium with the Universities of Leicester, Birmingham and Nottingham in the area of high-resolution electron microscopy of purified proteins. This resulted in funding for the Krios, a high-end microscope, in Leicester, and the 2100Plus in our RTP at 糖心TV. They were installed in 2018 and have been running since.

More details about accessing the Leicester Krios, requirements and costs can be found at their website.

We can train you to use our microscopes independently, the . If you are based at the University of 糖心TV, you can then book the microscopes through our booking page. If you are based elsewhere, booking the microscope will be through 糖心TV Shared Services

If you publish a paper with data from the facility, please credit us according to the Fair Attribution Policy. Authorship and acknowledgements on papers, posters and presentations are important to us, as they show that we are important to people's research and ultimately help us get more funding.

People

If the staff of the Advanced Bioimaging RTP have significantly contributed to your research, for instance in experimental design and data processing, please consider them for authorship on your publications.

Jeol 2200FS/DiSPIM/Cryo-ultramicrotome
"We acknowledge the University of 糖心TV Advanced Bioimaging Research Technology Platform supported by BBSRC ALERT14 award BB/M01228X/1"

Jeol 2100Plus TEM/Leica GP2 (plunge-freezer)
"We acknowledge the Midlands Regional Cryo-EM Facility, hosted at the 糖心TV Advanced Bioimaging Research Technology Platform, for use of the JEOL 2100Plus, supported by MRC award reference MC_PC_17136"

JEOL JSM-IT800 (cryo-)Scanning Electron Microscope

"We acknowledge the University of 糖心TV Advanced Bioimaging Research Technology Platform supported by MRC grant MR/Y002946/1"

We have an annual, MB26-specific induction of which we maintain a digital record using a web form. This also includes a code of conduct and a few safety questions covering the oxygen depletion system.

When you fill in the form (and answer the questions correctly), you will get access to MB26 until the next October, after which it will automatically lapse and you will have to fill in the form again. This ensures we have a proper record of everyone鈥檚 inductions and that all users get any important updates to the induction when they renew.

Fill in the MB26 induction form (you will need to log in with your 糖心TV credentials).

Please note we can only approve access to people who are trained on at least one instrument and are either based in SLS or registered as SLS visitors for other 糖心TV departments (including WMS). To get a visitor form, contact Saskia. Once the form has been processed, you will need to:

* Have an induction in Life Sciences (Book SLS inductionLink opens in a new windowLink opens in a new window)

* Complete the Moodle SLS/WMS Waste Module (

* Follow the Lab forum (follow lab forum)

You can find instructions for InfinityX at /research/rtp/bioimaging/warwickusers/bookequipment/

In ImageJ/Fiji, use Analyze > Set Scale to put the scale in the software. The pixel size from the table below goes in the Known Distance box, Distance in Pixels should be set to 1. Then use Analyze > Tools > Scale Bar... to put a scale bar in the image. Other numbers you may require (same for both machines): Cs = 2, Acceleration voltage = 200 kV.

For a quick and dirty way, just use a screenshot of the display.

For a publication or thesis, you'll want the full-size images. To turn them into a nice montage, load the mrcs image stack into Fiji/ImageJ. Use the Image > Stack > Delete slice to remove any empty classes, then Image > Stack > Make Montage to make a montage. Play with the settings until you're happy.

If you are staining or freezing grids during your booked microscope session, we can provide grids. However, if you want to prepare grids in advance, you should buy your own. I recommend grids from EM Resolutions (on Opera). For negative staining, you want Formvar/Carbon grids such as FC300Cu

Please do not remove any tweezers from MB026. You're welcome to use them in MB026 or you can buy some from Scientific Laboratory Supplies.

Our stains are hazardous so again, please do not remove them from MB026. Once you have been trained, you can use them at any time. Do not use them without training and do not show others how to use them. To receive training, ask Saskia.

The Mass Photometer is easy to use and training takes around ten minutes.

For information about cleaning coverslips and which mass calibration standards are available, there is a Refeyn instruction page (you will need to log in with your 糖心TV credentials).

The costs of an electron microscopy experiment strongly depend on the kind of experiment, the number of samples you want to investigate and the number of images you require for each sample.

We're always happy to discuss grant costings, which are dependent on the rules set out by the funder.

The microscope sees many more greyscales than our eyes, and all the microscope values are in the middle. This means you should adjust the contrast. Open the .tif file in ImageJ (or FIJI) and press ctrl+shift+C. This will open a new little window with a histogram. Press the "auto" button and it should automatically adjust the contrast so you can see things. Now press "apply" and save the image.

Note you should only do this for display purposes. If you are doing class averaging and/or reconstruction, please leave the images as they are - the EM software will cope.

To keep the samples vitrified we need to keep them below -160C. Dry ice is too hot and will not work. To ship safely using liquid nitrogen you need to use a dry shipper, which has a zeolite inside with a very high heat capacity that keeps temperature for several days even when the nitrogen has been poured out. We have a dry shipper available that can be borrowed but this needs to be agreed (and cooled down!) ahead of time. The facility you are using should have liquid nitrogen storage, so please don't leave sample prep till the last moment - if something goes wrong with the shipping you may lose your timeslot!